Bass Enclosures | NX2
PRODUCT SELECTION


UBER BASS
GB 115T-UB
GB 1288T-UQ
GB 210T-UB
GB 212T-UB
GB 410T-UB-4
GB 810T-UB


SHUTTLE SERIES
STL-10T
STL-12T
STL-2-12T EXT
STL-2-210T EXT
STL-210T
STL-8T


FOCUS™ LT SERIES
FCS-112T
FCS-115T
FCS-210T
FCS-410T


NX2
NX2-112T
NX2-212T


Find an internet dealer

Find a local dealer

Find a Showroom Dealer

NX2-212T





FEATURES
Proprietary Neodymium Loudspeaker
Our custom-designed 12" neodymium cast-frame loudspeaker is rated at 300 watts RMS and uses a 2 1/2" aluminum edge-wound high-temperature voice coil. The 7-oz. neodymium magnet assembly is encased in a large heat-sink structure for exceptional cooling. The paper cone, spider and dust cap are calibrated to deliver the low-frequency support and midrange articulation that today's bassists demand.

Dual Edge Porting
Integrated into the cabinet design is a special "dual-edge" porting system in which a shelf port at each corner of the baffle face forms an "X" across the radiating surface of the enclosure for increased low-frequency support and projection.

INPUTS AND CONTROL
All Genz Benz bass cabinets have 1/4" and Speakon® connectors for flexible connection options, and a variable tweeter level control for additional tone shaping.

Parallel Inputs - Either of the cabinet's two 1/4" full-range inputs can be used for input from the amp. The second input can then be used for daisy chaining two cabinets together.
Full Range Speakon® Input - This input and cable type are recommended when connecting to a high-powered bass amp rated at 400 watts or more.
Tweeter Level Control - Controls the amount of signal to the tweeter. Starting with the control set halfway is recommended; the tweeter output can then be balanced to the cabinet's speaker output in combination with the instrument's pickup tone and amplifier clarity.


   
         
DESCRIPTION

The most popular cabinet in its series, the NX2-212T is compact and lightweight, with a dual 12" design that drives with the heart of a 4x10" enclosure. The combination of two neodymium loudspeakers with "X" cabinet porting projects round, solid and explosive performance on any stage. Also, the vertical positioning of its dual 12" drivers enhances midrange projection-a design that helps cut through the mix. Lightweight design, "Edge-Lift" handles and tilt-back casters make traveling with this cabinet easy and convenient.


Power
Handling
RMS
Frequency
±/ 10db
Sensitivity
1W/1M
Nominal
Impedence
Crossover
Point
Weight
Lbs.
Dimensions
HxWxD
600 W
42-18K Hz 
101 db 
4 ohm
4 K Hz
47
31" x 21 1/4" x 16 1/2" 



2012 © KMC Music Inc., All Rights Reserved
As part of our commitment to improve design and quality of our instruments,
Genz Benz reserves the right to change pricing and specifications without notice.
Terms of Use | Privacy Policy